PEG^® Solar Cleaning Solutions

GEVA-BOT PATROLLER, Robotic cleaning solution for PEG® solar power plants

About GEVA-BOT

The GEVA-BOT Patroller is a reliable and user-friendly robot for module cleaning, which is in commercial use globally over the last 15 years. It can be supplied for both wet and dry cleaning. Its width varies from 1 meter up to 6 meters. The robot width required for the PEG® is ~1m or ~2m wide, subject to the module dimensions and orientation. It is lightweight (~12kg for the ~1m brush width) and easy to carry and operate. It is powered by a battery which can last up to 4 hours. A trailer with a water tank can be supplied as well, which can be towed by an SUV/Truck/Tractor during the cleaning process.

GEVA-BOT Benefits:

Can operate in most environments and climates
Quick site setup and simple operation
Significant reduction of cleaning time by up to 50%

GevaBot
Datasheet

Robot type	Patroller 1000	Patroller 2000
PEG Orientation	Landscape	Portrait
Length	1 m (3,3 ft)**	2 m (6,6 ft)**
Speed	3 secs/m (3.3 secs/yd)	3 secs/m (3.3 secs/yd)
Cleaning speed	~220 modules/hour	~470 modules/hour
Water Consumption (WET version)	1 liter/Panel (0.26 gal/Panel)	1 liter/Panel (0.26 gal/Panel)
Weight	12.5 kg (27.6 lbs)	16 kg (35.3 lbs)
Battery operation time	Up to 4 hours	Up to 3.5 hours
Battery charging time	6 hours	6 hours
Warranty	12 month	12 month

**: The Robot length is customized according to the module actual sizes.

GEVA-BOT

1 Nir st. Be’er Tuvia
Israel
Phone: +972 52 5400 400
Email: solar.gsi@gmail.com
Web: www.geva-bot.com

SERBOT Robots, Approved Solar Robot Cleaning Solution for PEG® Solar Power Plants

About SERBOT

The pvClean is a plug-and-play remote controlled solar panel cleaning robot with a high cleaning capacity and low maintenance costs for large scale solar systems. It is suitable for wet and dry cleaning and powered by battery or wire supply.
The smaller solar cleaning robot pvEco is for small and medium scale solar systems. Both robots were tested and are approved for the PEG system.
SERBOT is a Swiss based company, specialized in providing worldwide innovative robotic systems for solar modules cleaning, glass facade and all type of glass surface cleaning. SERBOT also offers worldwide After Sales Service and Customer Support.

Robot type	pvClean	pvEco
Scope of Application	Medium to large scale PEG installations	Small to large scale PEG installations
Load on panel	530Pa/m²	314Pa/m²
Cleaning Type	Wet and dry cleaning	Wet cleaning
Speed	Up to 1440 m²/h (~1,8 MWp/day)	Up to 550 m²/h (~0,7 MWp/day)
Operation time	2 h/Battery 2 batteries included for seamless operation as well as additional Continuous operation through wired electrical supply	Continuous operation through wired electrical supply

SERBOT AG

Galgenried 22
CH-6370 Stans
SWITZERLAND
Phone: +41 41 612 11 01
Email: info@serbot.ch
Web: www.serbot.ch

SolarCleano F1 robot by Specialized Solar Services,
robotic cleaning solution for PEG® solar power plants

About the Specialized Solar cleaning robot

Your all-in-one solar panel cleaning solution. The SolarCleano F1 is a remote controlled solar panel cleaning robot with the highest cleaning capacity. Suitable for wet and dry cleaning on any type of solar installaitons. Use of this robot requires is subject to approval from the module manufacturer. Specialised Solar Cleaning B.V. is Europe’s leading Solar Module Cleaning, Green surrounding maintenance and Thermographic drone inspection company. They have developed the most effective and efficient process for cleaning and decontaminating large, industrial scale solar installations (Ground, Roof and Floating) installations.

Cleaning with SolarCleano F1

The Specialized Solar Services trained specialist operator cleans solar panels using a specially developed robots called SolarCleano F1, that is most suitable for large solar parks with narrow passage ways (East/West table installation), Roof installed installations and floating solar parks. Stubborn dirt is removed gently, with the special designed and certified brushes. With an output of approx. 1200m2 per hour (Depending on the type and size of the module tables)

Specialised Solar cleaning BV

Molstraat 29
5622 AN Eindhoven
Netherlands
Phone: +31 624 665 452
Email:info@specialisedsolarcleaning.com

Web: https://specialisedsolarcleaning.com

Robot type	SolarCleano F1
Cleaning Type	For wet and dry solar panel cleaning
Speed	1,200m²/h (1 robot = 2 MW = 1 day = 1 person)
Battery operation time	Central electric switching box. Power supply by lithium-ion batteries enabling an autonomy of 2h30

Gal-In system, a cost-effective cleaning system for PEG^® PV solar power plants

Features

The Gal-In module cleaning solution is lightweight, only 18 kg (40lb) and easy to operate. Its axis allows comfortable transportation and guarantees complete contact between the brush and the modules during the cleaning. Its 10 water nozzles allow homogenous distribution of water on the complete surface of the module for efficient cleaning.

Operation

Two operators are required to operate with each person located on opposite sides of the PEG block. The brush is moved by pulling a rope. Based on its global use ~865 modules can be cleaned per hour with two operators. This system is suitable for small-scale projects and remote sites. The system is frequently and commercially used at PEG sites in Israel and India.

Manufacturer:

Jurchen Technology India Private Limited
414, The Summit Business Bay (Omkar)
Andheri – Kurla Rd, Opposite to Cinemax, Chakala,
Andheri East, Mumbai, Maharashtra – 400093. India.

Board No. Phone: +91 22 4968 9797
sales@jurchen-technology.com

Download:

Telescopic Arm by Qleen (PTS System Qleen)

Motor brush “Vario light 50”

50 cm (~20 in) width
4,7 kg (10.4 lb) weight

Carbon poles

Standard pole 1.6 m (~5 ft) long, with an extendable arm of up to 12m (~39 ft) long
Easy „click-in“ function to lock the extendable arm
Very light
Diameter: 42 mm (~1.6 in)
Additional extension up to 15m (~49 ft) is possible.
A standard PEG block which is up to 30x30m (max) (~98×98 ft), can be cleaned easily. The use of a glide shoe, a semi-circular brush, is recommended to prevent the pole from scratching the modules.

Running gear

Gel battery: lasts approx. for one working day
Cable tray 50 m (164 ft)
No electricity generator nor suction pump are required

Handling

Simple to setup and operate. Everything other than the water tank is provided with the Qleen system, including the electric power (battery), suction pump and cable tray. The cleaning of a PEG block requires access from both edges of the block since the maximum pole length is 15 m (~49 ft).

Technical and economic specifications

Cleaning speed: ~180 sqm per man-hour (with an experienced operator)
Approx. 200 liter water / hour
The system requires minimal maintenance. There is a fine filter at the water inlet, which has to be cleaned regularly. Apart from charging the battery there is nothing else to do. No regular inspection required.
The manufacturer Lehmann has delivered more than 1,200 QLEEN tools during the last 8 years for different regions globally in the Middle East, North Africa, South and Central America and Europe.