Unibase/Twinbase
PV substructure

Substructure for ground based power plants

Jurchen Technology will provide you with a suitable frame system for your photovoltaic power plant, appropriate for the type of terrain. Regardless of whether it be the single-support UniBase, the double-support TwinBase or a completely adapted system – Jurchen Technology has a product for every application.

UniBase advantages

Installation friendly assembly without sealing of the surface area (no concreting necessary)
Inclination: Standard 25°, individual design upon inquiry

Optimized aptation to the area structure: uneven areas can also be developed
Universal application for all frameless and framed modules

System designed for snow-load zone II and wind zone I (other dimensioning upon inquiry)
Small amount of components which allow for a faster installation

UniBase VAL R

UniBase VAL R

Vertically arranged modules

Technical data UniBase VAL R
Stud distance	3.04 m
Width/Module table	6.20 m
Height	approx. 2 m
Inclination of the modules	25°, or other
Height above ground	approx. 0.45 – 0.80 m
Applied modules	Framed and frameless modules
Max. count of modules tables (due to temperature strains)	5
Material	Steel (S235, hot-dip galvanized), Aluminum (EN AW 6060)

UniBase HAL D

UniBase HAL D

Horizontally arranged modules

Technical data UniBase HAL D
Stud distance	3.04 m
Width/Module table	6.20 m
Height	approx. 2 m
Inclination of the modules	25°, or other
Height above ground	approx. 0.45 – 0.80 m
Applied modules	Framed and frameless modules
Max. count of module tables (due to temperature strains)	5
Material	Steel (S 235, hot-dip galvanized), Aluminum (EN AW 6060)

UniBase D

UniBase D

Ground plate fixed by doweling

Technical data UniBase D	approx. 3.04 m (Depends on the module)
Width/Module table	approx. 6.20 m (Depends on the module)
Height	approx. 2 m
Inclination of the modules	approx. 25°, or other
Height above ground	approx. 0.60 m (bottom edge of the module table)
Applied modules	To request
Number of modules	2×6 or 2×7
Max. count of modules tables	approx. 5 (Depends on the module)
Material	Steel (S 235, hot-dip galvanized) Steel (S 355, hot-dip galvanized) Aluminum (EN AW 6060)

TwinBase advantages

Inclination: Standard 25°, individual design upon inquiry
Universal application for all frameless and framed modules

System designed for a wind speed of 150 km/h
Small amount of components which allow for a faster installation

Scalable use at customer’s request

TwinBase
TwinBase OW

TwinBase

Flexible twin stud system

Technical data TwinBase
Stud distance	Depends on the module
Width/Module table	Depends on the module
Height	approx. 3.20 m
Inclination of the modules	25°, or other
Height above ground	approx. 0.7 m (bottom edge of the module table)
Applied modules	Universal fittable
Material	Steel (S 235, hot-dip galvanized) Aluminum (EN AW 6060)

TwinBase OW

TwinBase EW

Non-stop solar radiation due to east-west alignment

Technical data TwinBase East-West
Stud distance	Depends on the module
Width/Module table	Depends on the module
Height	not known yet
Inclination of the modules	not known yet
Height above ground	not known yet
Applied modules	Universel fittable
Material	Steel (S 235, hot-dip galvanized) Aluminum (EN AW 6060)