smartFLAP®
Solar racking system for
First Solar Series 6 modules
What´s smartFLAP®?
smartFLAP® is a fixed tilt solar racking system for large photovoltaic modules. The system is optimized for FirstSolar Series 6 modules. smartFLAP® has rails with flaps.
What´s special about this solar mounting system?
The flaps allow exact positioning of the modules and prevent them from slipping backwards while the rails act as a guidance/track up to the final position.
Advantages
- Three times faster module mounting (vs. typical fixed tilt or tracker systems)
- Easy PV module positioning
- Less risk of injury and damaging modules
- Only 2 screws per module for fixing
Since January 2018 Jurchen Technology is
1st step: Placing the PV module on the rail
2nd step: Easy pushing to the final position
3rd step: Fast fixing of the PV module
Note: Uncoated modules with clear glass were used for this product presentation.
Three step module mounting:
1st Step: Safe Placing
The module is placed on the lowest part of the two rails. The module is safely positioned and cannot slip along the rails due to the presence of flaps.
Benefits:
- Safe, easy and fast placing
- No tools required
2nd Step: Easy Sliding
The module is pushed to its final position safely using the mop-like rod, without standing underneath the substructure. The module cannot fall sideways due to the shape of the rails and cannot slip down due to the presence of the flaps.
Benefits:
- Safe, easy and fast positioning
- Less risk of injury and damaging modules
3rd Step: Fast Fixing
Bolts are installed from underneath the module while standing on the ground without the need to climb on the substructure. The smart bolting solution connects two modules simultaneously.
Benefits:
- Safe, easy and fast fixing from underneath
- Reduced installation time and labor cost
Downloads
Brochure smartFLAP
Form for statics
PV substructure
Movie
Herbert Heidel
Matthew Lusk
Amit Chheda
Yoni Ben Mazia
Internal Sales Service & Project Management
Andrea Vidoni
Sabrina Klippel
